Antilaser G9 User Selectable Settings
Download Antilaser G9 User Manual
Antilaser G9 has many user selectable settings user can program using the programming key button (mute button) on the loom control harness. Settings are changed by pressing down and holding the program button for number of seconds, or by counting the number of green LED flashes any time the AL G9 is operational.
Instant Mute Parking Alert:
Setting: Hold 1 Second
Instantly mute a parking alert. This will not mute any other laser alerts.
Parking Detection Sensitivity:
Setting: 3 Flashes
User can select and cycle through four different parking detection sensitivity.
Silent Power-Up:
Setting: 5 Flashes
During activation upon power-up, the bi-color LED will flash green and red without audible signals.
Setting: 8 Flashes
When AL G9 detects laser interference from sources on 904-905nm wavelength, it is designed to shut itself off automatically on a timer. User can select 4 second or 8 second timer for the LID feature.
LED Dark Mode:
Setting: 10 Flashes
By default the AL G9's bi-color LED flashes green every second. Toggle this setting to disable the flashes.
Laser Power Output Adjustment:
Setting: 13 Flashes
By default AL G9 is configured to reduce error code detection. User can toggle this setting for the highest power output for the best performance.
Parking Sensor Mute:
Setting: 18 Flashes
By default AL G9 will flash red LED with audible beeps to warn driver obstacles. Toggle this setting to mute parking detection with only LED flashes.
Restore Factory Default Setting and Memorize Number of Connected Sensors:
Setting: 15 Flashes
Restore the factory default settings and enable the system to memorize the number of connected sensors. AL G9 will check if the number of working sensors equals number of memorized sensors every time it is turned on, and alert you if a sensor gets disconnected.
Manual Sensor Check:
Setting: 20 Flashes
Check how many sensors are connected and operating